Bearing is one of the highly important elements in all kinds of machines because it minimizes the friction between two objects. It also lets moving parts move smoothly and easily. Bearings are often divided into two major categories such as thrust and radial bearings. Of course, various types of bearings are accessible within these categories, such as ball, flange, roller, spilt, and mounted/unmounted. Among them, roller bearings always have a special position in the ground. It is used for various purposes in different industries. In this article, you are going to know about some of the major types of roller bearings.
Types of the roller bearings
Take a glance at the popular types of roller bearings, which accessed by several industries and machinery.
– Thrust cylindrical roller bearing
Actually, Thrust Cylindrical Roller Bearing is designed to accommodate impact loads and heavy axial loads. It should not be subjected to any kind of radial load. This bearing is extremely stiff and needs a little axial space. This bearing has separable design, which mounts shaft washer, cylindrical roller, cage, and housing washer separately. The roller ends are relieved slightly to change the line contact between rollers and raceway to prevent stress peaks and extend the service life of bearing.
– Stud type track roller bearing
Stud type track roller contains thick walled outer rings along with the profiled outside surface thrust washers, cage assemblies, and needle rollers. It supports high axial loads and radial loads arising from the skewed and misalignments. It is extremely suitable for conveying equipment, slideways, and cam drives. This bearing type is accessible in several designs with and without an eccentric. Find out the right Stud Type Track Roller Manufacturer to purchase the high quality bearing.
– Yoke type track roller bearing
If you look for the bearing, which absorbs high radial loads, then Yoke Type Track Rollers is the right type. This bearing is available in different variants with and without inner ring and availability of one or two rows. It is a single and double row unit, which fitted carefully on the studs. It contains thick walled outer rings along with the profiled outside surface as well as axial and radial loads. It is a ready to fit cylindrical and needle bearings with the thick walled outer ring. It is available in both open and sealed versions.
HHH Bearings 